Display Definitions

Note:    See the General Hardware report for additional information on this
              manager

             [Text] = Field only exists under given circumstance
         
• Display# = Number of monitor as shown in Monitor control panel
   ◊ Active = Is the monitor currently recognized by the system? [Color QD]
   ◊ Main Screen = Does this monitor contain the menu bar? [Color QD]
   ◊ Color Device = Is this monitor set as a color device in the Monitor control
              panel? [Color QD]
   ◊ Type = What method is used to determine color/gray scale level on this
              monitor? [Color QD]
   ◊ Nubus/PDS Slot# = What slot/board is this monitor controlled by.  This can 
              be cross-referenced in the Slot list  [Has Slot] [Color QD]
   ◊ Driver# = What driver is controlling this monitor. Check driver list 
             [Monitor Controlled by Driver] [Color QD]
   ◊ Screen Size = Dimensions of the screen in pixels (dots on screen)
   ◊ Resolution = Number of pixels per inch
   ◊ Pixel Depth = Number of bits of data required to store the information for
              each pixel as set in the Monitor control panel.  The number in parentheses
              indicates the number of colors/gray shades that can be shown on the
              screen at once. [Color QD]
   ◊ Max Pixel Depth (Installed Memory) = Same as above but indicates the
              maximum pixel depth that the given monitor can support as a function of
              the amount of video ram installed. [Color QD]
      + Mem Req for This Depth = Actual memory required to support the 
              maximum pixel depth.  This helps you to determine the amount of video
              memory available to this monitor. [Color QD]
   ◊ Mem Req for 24 Bit (Millions) = Amount of memory that would be
              required to support 24 bit depth (millions of colors). [Color QD]